Instructions for use of an electronic cigarette. The ABCs of vaping: brief recommendations for use and maintenance E cigarette sub two instructions for use

Despite its simplicity, the electronic cigarette is a rather complex product from a technical point of view. In addition, a gadget without proper care becomes capricious and may fail. When using a vape, the user must adhere to simple rules so that the operation of the device is effective and durable.

Beginners in vaping are primarily interested in the question of how to assemble and refill their first purchased electronic cigarette. Let's look at this process using the example of several popular devices.

Eleaf iJust 2

If you purchased a basic package of an electronic cigarette, for example, Eleaf IJust 2, then opening the package, you will see a battery, a clearomizer, a USB cable and a silicone ring (used to adjust the tightening force by blocking the air inlets), as well as instructions for use, which describes in detail how to use the gadget.

To assemble the vape, just screw the clear to the battery pack. The battery is charged via the USB port of a computer or laptop. Can also be purchased separately network adapter for charging the battery from the network.

To fill your device with vaping liquid, do the following.

Unscrew the flask from the evaporator.
Take the evaporator in your hands and, carefully turning it, saturate the wick with liquid so that the liquid does not fall into the central hole.
Also drop the liquid into side holes on the evaporator. The wick must be soaked very generously with the liquid: in this case, it is better to overfill than underfill. If this is not done, then when you turn on the coil, poorly saturated areas on the wick will burn, and a burning smell will appear during vaping.
After the wick stops absorbing liquid, pour it into the tank through the special holes, as shown in the following figure.
You can fill the tank completely, but there is no need to overfill the liquid.
After filling, screw the flask to the evaporator.
Check that there are no leaks.
Screw the clearomizer to the battery pack. Wait a couple more minutes until the liquid saturates the wick well, after which the device will be ready for use.

The improved model of the iJust s device provides top filling liquid tank: remove the upper part of the container and fill in the required amount of liquid, as shown in the following photo.

EVOD CE5

The basic package of the EVOD CE5 vape consists of the following components:

battery EVOD 1100 mAh;

clearomizer CE5;

USB charging cable with a connector suitable for EGO batteries;

1 bottle (11 ml) with liquid, which you can choose to your taste.

Assembly of this vape is also very simple: screw the clearomizer and battery together. The battery is charged from PC or laptop, as stated above. Refilling this device is distinguished by its simplicity:

first, you should unscrew the mouthpiece;

after disconnecting the mouthpiece, you need to take a bottle of e-liquid and fill it in such a way that it flows down the walls, bypassing the central hole;

on average, the flask should be filled to half or a little more;

After refueling, screw the mouthpiece back to its original place and check that the liquid does not leak out, after which you can use the device.

Joyetech eGo AIO

The Joyetech eGo AIO starter kit includes the following components:

vape assembly (with mouthpiece), but without evaporator;

2 replaceable BF 316SS stainless steel evaporators with a resistance of 0.6 Ohm;

glass mouthpiece – 1 pc.;
charging cable (micro USB);
instructions for use.

Assembling the vape is quite simple, as shown in the following figure.

But the device charges already after micro USB port, built-in on the side of the device.

The battery can be charged from a PC or from a network adapter (purchased separately) with a DC 5V output. Once the battery is fully charged, the indicator located on the button goes off.

But the fact that you have assembled all the components together is not enough to start the device. You also need to pour liquid into it. This is done as follows:

Unscrew the atomizer base from the device body.
Remove the new evaporator (included) from the package.
Take the liquid and drop it into the hole to thoroughly saturate the wick. Wetting should be very generous and continue until the liquid stops being absorbed.
There are 2 holes on the back of the atomizer, into which you should also drip liquid, after which you need to remove the remaining liquid from the contact (pin). You can use a napkin or toilet paper for this.
After impregnation, attach the atomizer to the base.
Now you can refill the liquid into the e-cigarette flask itself. When refilling, pay attention to the mark on the vape body, with the word “max”. You cannot pour slurry above this line.
After filling the flask, screw the base with the atomizer to it. Now the vape is completely ready for use.

How to turn the vape on and off

Many beginners, without reading the instruction manual for the vape, when trying to turn on the gadget, experience disappointment and panic because their electronic cigarette does not turn on. This happens for the reason that modern vapes have protection against accidental activation, for example, in a pocket or bag. To unlock the vape and also turn it on, you need to press the key 5 times within 3 seconds. If you want to turn off the device after vaping, do the same procedure again.

If your e-cigarette doesn't have any buttons, it means it automatically activates when you take a puff.

How to set up a vape

The electronic cigarette in the form in which it was presented above does not require any special settings. Unless you can adjust the tightening force. Also, some more “advanced” vapers try to rewind the coil themselves in order to change its resistance to achieve a different taste sensation while vaping.

For vapers who are no longer satisfied with the standard electronic cigarette, there are so-called box mods, which is a battery pack. The mod is equipped with an electronic control board and a small display. Thanks to the electronic filling, it becomes possible to more precisely customize the vape to the needs of any vaper. Therefore, adjusting the vape involves adjusting several parameters.

Power

This refers to the power that affects the coil of the atomizer (steam generator). The larger the spiral, the more power can be applied to it. But everything must be within reasonable limits, otherwise the heating element may burn out. Also directly depends on the selected power battery discharge time: the higher it is, the faster the battery will run out. It is recommended to set the average power value - from 15 to 20 W.

If the power value is exceeded, the following negative aspects may appear.

The battery will quickly lose charge.
The case will become very hot (sometimes it is difficult to hold the vape in your hands). In this case, the device must be turned off and allowed to cool for some time.
Maybe burning of the wick, and, as a result, a burning taste during vaping.

Varivolt

The “varivolt” function allows you to change the voltage supplied to the coil manually. Moreover, the power will depend on the resistance of the heating element. Based on this, it turns out that the volume of the inhaled steam-air mixture depends on the voltage.

The principle of operation is quite simple: the higher the voltage value is set on the mod, the stronger the heating of the coil occurs, as a result of which the amount of steam increases and the aroma of the liquid is revealed more clearly. But if you exceed the voltage, the wick will burn and a burning taste will appear. Therefore, this parameter is selected by trial and error.

When changing a clearomizer (with a different resistance), you will again need to adjust the required voltage using the selection method to achieve the required results.

Variwatt is the ability to adjust the power of the vape if you change the resistance of the coil, is an improved version of varivolt. If your mod has a “vari-watt” function, then, as a rule, there is no need to manually adjust the voltage. This fact is explained by the fact that the voltage automatically adjusts to the resistance of the heating element. Thanks to the “variwatt” function, as in the Kangertech KBOX 120-200W box mod, the vape can be more precisely adjusted, allowing you to achieve maximum results from the device without failure of the coil.

This function gives the vaper the opportunity to comfortably use the device. It is enough just to set the power that is comfortable for the steamer once and not worry when changing clearomizers what their ohm capacity is. The mod itself will adjust to the clear’s resistance and level the power to the previously set values. Therefore, no matter what clears you set, the power will not change, and the steamer will always be able to observe a lot of smoke.

Thermal control

This function is not available to all vapes. But if it is present in your gadget, then no need to configure it. Thermal control operates in fully automatic mode and is only available if your device has a nickel or titanium spiral installed. Only with such metals can the electronic filling of a vape work.

Thermal control works as follows: if during vaping the temperature of the coil reaches a critical level, then the power is reduced so that the heating element can cool down. For the vaper, this process usually happens unnoticed.

Rules of soaring

Newbie vapers who are used to smoking traditional cigarettes often make mistakes while vaping. As a result, side effects may occur such as overheating of the device, leakage of liquid from the mouthpiece, the appearance of a burning taste, and others. But, if you use the gadget, adhering to the following rules, then all these troubles can be avoided.

First puff rule. It must be followed every time you are about to start vaping. It consists in the fact that the vaper must take the shortest possible puff so that the wick begins to become well saturated with liquid, as if lighting a cigarette before starting to smoke.
It is recommended to first take the steam into your mouth, and then try to inhale it into your lungs. You shouldn’t take a deep inhale right away, as the vaping liquid can be quite strong. To get used to the steam, take 10 to 12 short and, if possible, not deep puffs. That's how many puffs it takes to smoke a regular cigarette.
Follow frequency and depth of puffs. Taking shallow but long puffs will allow the atomizer to produce rich, dense vapor. Avoid sharp breaths - this causes condensation to form, which can get on the battery contacts and cause a short circuit.
Take your time. The fact is that when tightening, the coil heats up, which, in contact with the wick, evaporates the liquid. It is necessary to allow the spiral to cool, and the wick to replenish the liquid from the place from which it evaporated. If you take frequent puffs, the wick will burn and the coil will overheat.
Hold your vape correctly. While vaping, the device must be held in such a way that it is slightly tilted. Thanks to this position, there is a more uniform flow of liquid into the evaporator.
In some mechanical models of electronic cigarettes with a button (mechanical mods), in order to take a puff, you need to simultaneously press the button on the body of the gadget while inhaling, and then release it when finished. Some vapers like to use a mechanical mod, but most still prefer automatic steam supply.

Security measures

When using a vape, you must follow safety rules.

Do not allow the liquid to get into your eyes, mucous membranes or tongue. Moreover, you should not swallow it - it can cause poisoning.
Avoid exposing the device to direct sunlight, and do not keep the gadget in a room if the temperature is high.
Take every precaution to ensure that your e-cigarette did not fall into the hands of children.
Do not clean a gadget connected to a charger. Before preventative cleaning of the vape, it must be turned off (by pressing the button 5 times) and disconnected from the charger if the device was connected.
Do not charge your vape indoors with high humidity or outdoors in damp weather.
You can't hover while driving. Remember, vaping is dangerous while driving because the thick cloud of vapor obscures your vision.

Smoke rings are easy

Well, you’ve learned how to smoke, that is, vape. What's next? Bored smokers have long figured out how to make this process more interesting. It involves blowing smoke rings. Vapers have successfully adopted this experience and offer 3 basic ways to do this trick from vapor.

Get a lot of steam into your lungs. Purse your lips as if you are saying the letter "O". In this case, the tip of the tongue should be fixed in the center. Exhale short and lightly, as if coughing. After several trainings, you will be able to make beautiful and even rings.
You should gather more steam and then roll it up tube-shaped lips and pull them forward a little (you won't need the help of your tongue). Push the steam out of your lungs sharply and as often as possible. With this method, the first and last rings are not obtained, but in general, the result is quite good.
This method of making rings is called "W" method. If you master it perfectly, you can make very beautiful and even smoke rings. But first, learn how to pronounce the English letter “W” correctly. It sounds like “Ay” or closer to “Oh”. After practicing the correct pronunciation, you can start learning how to make steam rings. Pour steam into your cheeks, then purse your lips as if preparing to make an “O” sound and pronounce the letter “W” while releasing smoke from your mouth. When you pronounce an English letter, your lips should be as tense as possible. To change the size and clarity of the rings, you can change the diameter of the lip circumference.

Any vaper can learn how to release steam rings correctly, as in this video. But vaping fans went further and began to complicate this process. For example, you can release a cloud of fog that looks like a jellyfish, like in the following video. Have fun soaring!

Pons Slim: instructions for use

Screw the battery onto the USB adapter. Insert the USB adapter with the battery screwed onto it into the USB socket of the 220V charger or into the USB port of the computer. When the battery is charged, the LED at the end of the battery will turn off.

Charging the battery takes 2-3 hours. For the first time, the battery must be charged for 5 hours.

Screw a fully charged battery onto the atomizer.

Place the cartridge on the atomizer. Please note that initially a protective cap is installed on the atomizer, not a cartridge. When using for the first time, replace it with a cartridge. Smoking a ponce cigarette with a protective cap instead of a cartridge may damage it.

Take a puff on a ponce cigarette just like you would on a traditional cigarette. The LED at the end of the cigarette will light up in time with your puffs. This means that the pons cigarette is working correctly.

A flashing LED on a ponce cigarette indicates that the battery is low.

One cartridge is enough for about 150 puffs. If there is no steam when the battery is charged, it means the cartridge is exhausted.

To replace an empty cartridge, pull it off the atomizer while holding the pons cigarette by the battery. Install the new cartridge by pushing it all the way onto the atomizer.

Ponce cigarette cartridges contain propylene glycol, nicotine, flavorings and other ingredients that can satisfy the needs of the most demanding consumers.

Before doing this, we recommend reading our article on what it is Electronic Cigarette and get acquainted with the principle of its operation.

Preparing for first use

First you need to charge your battery electronic cigarette using the charger included in the kit. The first time charging should take at least 8 hours, regardless of the indication on the device.

Then you should fill the container evaporator (clearomizer) liquid for refilling your electronic cigarette. To do this you need to unscrew evaporator head (base) from the evaporator and pour in liquid at a moderate speed along the walls so that it does not enter the central ventilation hole. Full filling of the clearomizer is about 70-80% of its maximum volume. After finishing filling, screw the base back on. Combine the evaporator and battery by screwing in the evaporator.

Comment! Do not use a cigarette with an empty vaporizer - this may damage the cigarette or cause discomfort from smoking.

Please also note that a few puffs at first will produce less vapor than standard, since the evaporator must be saturated with liquid.

It is important to know! In order to properly use an electronic cigarette, you need to draw in vapor when you press the button, not too fast so that the liquid in the clearomizer has time to evaporate. Unlike regular cigarettes, the harder you puff, the less vapor you inhale! And in some cases, with very strong retraction, liquid may enter the mouth, since it has not had time to evaporate at all. To avoid such a situation, smoke an e-cigarette slowly, slowly drawing in the steam.

Accumulator charging

To charge the battery, first connect the charger to a power source, and then screw the battery into the charger. The indicator should change color or go out, depending on the model, when charging is complete (about 3 hours).

Precautionary measures

Do not use in very humid conditions or at high temperatures.

Try not to mechanically damage the device.

If the battery becomes overheated or begins to emit an unpleasant odor, stop using it immediately.

Chargers for each model of electronic cigarettes are unique.

Keep all components and consumables, as well as the cigarette itself, out of the reach of children and animals.

Make sure that the heating element is always in contact with the liquid and refill the evaporator on time.

The contacts of the battery and evaporator should be free of condensation, dust and moisture. Wipe the contacts with a cloth from time to time.

Smoking a cigarette should be leisurely, no sharp puffs, since, unlike a regular cigarette, sharp puffs do not increase the amount of smoke. In general, with an e-cigarette, the longer you puff, the more vapor is created. However, puffs longer than five seconds may cause the vaporizer coil to overheat, so be careful.

You should not smoke an e-cigarette while lying down, because if you hold the cigarette upright with the mouthpiece down, the liquid flows away from the vaporizer head and may cause an unpleasant burning taste in your mouth.

Read more useful information on the website

Modern electronic cigarettes turn on automatically at the moment when the steam generator detects the presence of draft and automatically turn off when there is no draft.

How do you know when the battery needs to be recharged?

Electronic cigarettes indicate when the battery is low with a tip (light indicator). The indicator starts flashing for about 10 seconds. E-cigarette kits include 2 batteries so you can continue to use the device while the dead battery is recharged.

If you feel little or no steam, this indicates that your battery is completely discharged. Check that the battery is installed correctly and that the cartridge is installed correctly. In addition, check the cartridge to see if it needs to be replaced.

How long does the battery last and when does it need to be charged?

The energy reserve in electronic batteries is several hours, depending on the type of battery (types: classic electronic cigarette, electronic mini cigarette, electronic tube). It also depends on the intensity of cigarette use. The longevity of the battery also depends on the intensity of use and on compliance with the rules for discharging / charging the battery. (The battery must be completely discharged - then fully charged). We recommend taking spare batteries and chargers with you when traveling or to events where frequent use of a cigarette is likely.

How long does it take to recharge batteries?

It depends on the type, but on average a new battery should be charged within 4 hours for the first time. All subsequent recharges take approximately 2 - 3 hours.

Most chargers have an indicator that turns red when charging and turns green when the battery is fully charged.

How many times can the battery be recharged?

It depends on the type of electronic cigarette used (types: classic electronic cigarette, electronic mini cigarette, electronic pipe). On average, a battery can be recharged about 300 times.

What are the main advantages of electronic cigarettes?

100% imitation smoking.
The ability to gradually reduce nicotine consumption without giving up the smoking habit.
There is no dependence on harmful tar, nicotine and products released when burning tobacco and paper in conventional cigarettes.
There is no smell in the house, from clothes, from hands.

What does the smoke emitted from an e-cigarette consist of?

Compared to regular cigarettes, the simulated smoke is vapor from a nicotine-containing liquid. This smoke is nothing more than steam, which evaporates into the air within a few seconds and leaves no odor. The steam does not contain any unwanted chemicals as there is no chemical reaction or combustion process.

How much nicotine is contained in cartridges?

The refill cartridge may contain nicotine. Nicotine is a naturally occurring alkaloid found in tobacco leaves and other plants that contain nicotine. This is the main substance that makes smokers addicted. When a person smokes, nicotine enters the blood within 7-9 seconds and the smoker experiences a physiological response of satisfaction. Over many years of use, “Nicotine Replacement Therapy” has demonstrated its effectiveness and safety for quitting smoking, according to the opinions of many experts and many clinical experiments. Free from harmful substances such as tar and carbon monoxide, the cartridge can minimize the harm of smoking for most passive smokers; at the same time, this simulated smoking can reduce discomfort during the smoking cessation period, since the cartridge contains only a small amount of pure nicotine. A toxicity test of a nicotine-containing cartridge has been confirmed by a number of reputable organizations as to its safety.

Cartridges have different nicotine levels. Nicotine levels range from 0 to 18 mg, with some having higher levels. Each level is designed to correspond to real cigarettes in the following order:

Extra high. 24 mg nicotine. Like Belomorkanal cigarettes without a filter.
High content (HI) of cartridges is 16 mg (or 18) of nicotine, approximately the same as regular cigarettes.
Average content (MED) of 12 mg (or sometimes 11 mg) of nicotine, approximately the same as in light cigarettes.
Low content (LOW) 0.6 mg of nicotine, about the same, super light.
Ecstanic low nicotine content 0.3 mg.
Zero content (NO) 0 mg nicotine.

How many cigarettes does one cartridge replace?

Different smokers use different brands of cigarettes, which contain different amounts of nicotine. For example, the label on a regular pack of cigarettes indicates 1.1 mg of nicotine, which means that each cigarette in the pack contains 1.1 mg of nicotine. Thus, one pack of regular cigarettes (20 pieces) contains nicotine in an amount equal to 1.1 mg * 20 = 22 mg. One cartridge can be smoked in more than 300 puffs, which is equivalent to one pack of regular cigarettes with equivalent nicotine content. According to the nicotine content, refill cartridges are divided into four types: strong, medium, light and nicotine-free. Strong (nicotine content: 18 mg) Medium (nicotine content: 11 mg) Light (nicotine content: 0.6 mg) Nicotine-free (nicotine content: 0 mg)

Cartridge usage:

Cartridge – intended for use with Electronic Cigarette only.
The cartridge is a disposable product, do not reuse it. Please dispose of it properly after use and keep the cartridge out of the hands of children.

Precautions when using the cartridge:

Storage: Keep cartridges in a cool, dry place.
Please keep cartridges out of the reach of children.
Please do not use the cartridge after the expiration date. The shelf life of the cartridge in the package is 24 months.
Do not allow nicotine liquid to come into contact with the mucous membrane of the mouth.
It is prohibited to use by pregnant women, persons under 18 years of age, as well as those with medical contraindications to smoking.
The nicotine-containing liquid in the cartridge is prepared in strict proportions. Mixing with other liquid is prohibited.

The cartridge is designed according to “Nicotine Replacement Therapy” recommended by the World Health Organization (WHO). This therapy allows smokers to gradually reduce the amount of nicotine they ingest. It is recommended that users use a cartridge that matches their cigarette type and then gradually and painlessly reduce the nicotine content to a nicotine-free cartridge.s

What is nicotine?

Nicotine is an alkaloid produced in certain factories, found primarily in tobacco, and in lower quantities found in tomatoes, potatoes, eggplant, cauliflower, green peppers and some teas. When consumed in small quantities, from cigarettes, cigars or pipes, nicotine causes excitement, feelings of relaxation, calm, and alertness. The effects of nicotine can last from a minute to several hours. Nicotine is considered an addictive habit.

For comprehensive information about nicotine, see the article Everything you wanted to know about nicotine, but were afraid to ask.

Does nicotine cause cancer?

The medical community believes that nicotine does not cause cancer. Nicotine research is ongoing, and medical research has found some advantages and disadvantages of nicotine consumption. The main cause of cancer is the tar released when tobacco is burned.

How long does an e-cigarette cartridge last?

It all depends on the intensity of use and the type of device they use. Here is an approximate breakdown of each type:

One cartridge - the “classic cigarette” type should be enough for 15-20 regular cigarettes.
One tube-type cartridge should be enough for 25-30 or more regular cigarettes.

What is the expiration date for e-cigarette cartridges?

If stored in a cool, dry place, the average shelf life is 24 months.

Can I refill my cartridges?

Yes. There are liquids for refilling cartridges for this purpose.

The cartridge allows two refills; subsequent refills become ineffective.

You can refill any cartridges with any e-cigarette liquids. (Nicotine level and flavor don't matter.)

How will I know when the cartridge needs to be replaced?

This will be noticeable by the shrinking steam. As the cartridge empties, the vapor will become less and less.

It is possible that the steam has become less due to the battery being discharged. If, after replacing with a freshly charged battery, there is still little steam, you should replace or refill the cartridge.

Are there any warranties for electronic cigarettes?

Yes. The warranty covers the steam generator and charger.

The warranty may be denied if there is mechanical damage to the electronic cigarette.

Does the smell remain after smoking an e-cigarette?

There is a smell/aroma when smoking e-cigarettes. The aroma depends on the selected cartridges.

Since electronic cigarettes imitate the smoking process and emit not smoke, but steam, there will be no smell from clothes, hands, or in the room.

Can I smoke e-cigarettes in public places?

Yes. Because they are non-flammable, do not contain tobacco, and do not produce smoke, they are not a form of smoking that is prohibited in public places.

Many people, without problems or complaints, use such cigarettes in restaurants, bars, airports, airplanes, workplaces, and many other places where smoking tobacco is discouraged or completely prohibited.

Are minors allowed to buy e-cigarettes?

No minor has the right to use or purchase electronic cigarettes.

Can I use e-cigarettes if I'm pregnant?

Electronic cigarettes should not be used by pregnant or breastfeeding women.

Are e-cigarettes really less harmful than regular cigarettes?

You can read the Interview about tobacco products and alternative methods of replacing smoking tobacco.

Do e-cigarettes smell like smoking regular cigarettes?

Regular tobacco flavor cartridges are somewhat similar in flavor to tobacco cigarettes, but have a milder/smoother and less harsh taste. The cartridges also come in a huge variety of other flavors that you may like more than tobacco flavors.

Do electronic cigarettes require any maintenance?

The only maintenance required is to charge and change batteries and change cartridges.

You should also protect e-cigarettes, cartridges and components from water and heat.

There may be programs in which cartridges are sent to you in a certain month and in a certain quantity. Participation in such programs is voluntary and sometimes reduces the cost of cartridges.

Any other questions or concerns I should know about e-cigarettes?

Electronic cigarettes are permitted for use only by dependent smokers over 18 years of age. Smoking is prohibited for children, pregnant women, breastfeeding women, people with heart disease, high blood pressure, diabetes, or taking medication for asthma.

There are certain difficulties in figuring out how to use them. But in fact, there is nothing easier than using an electronic cigarette, and now we will show and tell you everything in order.

Prepare for use

First of all, you will need to fully charge the cigarette battery, even if it already has a certain charge. Use and charge the battery for at least eight hours for the first time.

After this, fill the clearomizer with a special one. To do this, unscrew the evaporator head, it is often called the base, and carefully fill it along the wall. It is not recommended that liquid enter the ventilation duct, which is located in the center. The evaporator can be considered fully charged when 70-80% of its entire capacity is filled. Then screw the head back in place and connect the clearomizer to the battery.

Attention! Do not use empty cigarettes - this may damage them or cause discomfort when smoking.

Immediately after refueling, during the first puffs, the vapor may be several times less due to the fact that the liquid has not yet reached the evaporator in full.

How to smoke electronic cigarettes correctly?

If you use these cigarettes correctly, you will get maximum pleasure from smoking. There are few secrets here: press the button and slowly draw in the steam. The key point is the slow, measured sipping of steam. Due to this, the liquid will evaporate more efficiently and more efficiently than with strong puffs. If you pull too hard, nothing will have time to evaporate and the liquid may even end up in your mouth.

How to charge the battery?

To charge your e-cigarette, connect the charger to the mains (or other power source) and then screw the battery onto it. In this case, the charger indicator will either go out or change its color (depending on the specific model). After 3-5 hours, charging will be completed and the green indicator on the charger will light up.

Precautionary measures:

Avoid use in highly humid conditions and high temperatures.
Protect cigarettes from mechanical damage
If the battery begins to heat up suspiciously, swells, or begins to emit unpleasant odors, stop using it immediately.
Use only original chargers; each model is equipped with only its own type of charger.
Keep devices and all electronic cigarette accessories and consumables out of the reach of children and pets.

The heating element must always be in contact with the liquid, watch this and refill it on time.
Keep the contacts on the evaporator and battery clean; there should be no dirt, especially moisture. Clean them if necessary.
Smoke slowly, without sharp breaths or strong puffs. The main difference between electronic cigarettes and their smoky counterparts is precisely that the volume of smoke (vapor) does not increase with powerful puffs. Everything works exactly the opposite - you need to take smooth and long puffs, then you will get maximum steam.
Do not smoke while lying down. All the liquid flows down and does not reach the heater, so you can only get an unpleasant burning taste.
Clean vaporizers and rinse e-liquid reservoirs and mouthpieces occasionally with warm water or alcohol.
If your e-cigarette gets too hot, check the cartridge to see if it is empty. But sometimes this is a consequence of frequent puffs, when the evaporator simply does not have time to cool down.

Read about proper use and care in the article - "