Electronic cigarettes ego t ce4 manual. Rules for the use of the electronic cigarette CE4. Precautions for using the EGO T electronic cigarette

The eGo CE 4 starter kit can be used by both professional vapers and inexperienced beginners. Thanks to the design and components, you can soar only for pleasure and enjoy abundant vapor and excellent taste transfer.

The main features of the device eGo CE 4

There are parameters that make this ES model competitive. Like other devices in the eGo line, CE 4 is an economical option due to the minimum set. In addition, this is a convenience for beginners who find it difficult to understand the mechanism of operation of parts of other models. A special button is responsible for turning the device on / off.

For the operation of the steam generator, the key is clamped and not released while the puff lasts. The manual battery, according to experienced vapers, is more reliable and durable compared to automatic models. All batteries of this line have the same diameter - 1.4 cm, but the length depends on the capacity and additional features.

You can purchase a device with a battery capacity of 650, 900 and 1100 mAh. The last option will be enough for a day at a battery level of 100%, if the smoker used to smoke 1.5 packs of cigarettes per day. The model has a universal CE 4-Turbo clearomizer with excellent steam generation, so heavy smokers appreciated it.

A clearomizer can be used for 2-3 weeks by those who smoked about one and a half packs of classic tobacco products earlier. The part is pretty easy to replace. The basic package includes a USB cable that allows you to connect the e-cig to a laptop and charge it. This can also be done using an adapter that is suitable for the characteristics in the instruction manual.

The standard kit includes a battery, a vaporizer, a USB cable, instructions. Then there is the possibility of expanding the configuration, for example, slurry with different flavors, a battery with variable voltage, serviced by atomizers. The main characteristics include the length of the assembled cigarette at 12.5 cm, the diameter will be 1.4 cm, the clearomizer has a capacity of 1.8 mg, and the battery is 650/900/1100 mAh, the operating voltage reaches 3.3 V.

The mini package includes a battery with a capacity of your choice, an atomizer, an adapter and a charger. The complete kit has 2 batteries, 2 vaporizers, an adapter, a charger, a bottle with a 10 ml refill needle and a gift box.

Review of the electronic cigarette EGO-T CE 4

The basic kit is quite comfortable to use and suits most. Feedback on the model is positive: purity of taste and large volumetric steam are present, as according to the manufacturer. This option is ideal for those who have previously smoked more than a pack of tobacco products.

The starting kit with a 1100 mAh and 3.3 V battery makes it possible to do about 900-1000 pulls on a single charge. Compared to classic cigarettes, this is about 3 packs. Note that the battery is simply an ordinary battery, easy to operate even for a beginner. However, everything else, has increased reliability.

The device was equipped with the ability to protect against short circuit, overcharging and accidental pressing. The key control makes it easier to inhale and release more steam. And the battery in the configuration serves more than automatic counterparts. The battery is unlocked/locked by pressing the key five times within 2 seconds.

If the procedure is correct, the LED button will give 3 short beeps. Note that after the final charge of the battery, it will turn itself off. Holding the button for 10 seconds makes manual shutdown possible. The metal body of the cigarette achieves strength and reliability of protection against mechanical damage.

A pleasant coating does not allow the device to fall out of the hands. It shows no minor scuffs and scratches. The stainless steel frame does not leave marks. The matte finish is another design plus. With careful handling, the e-cigarette Ego CE 4 will be like new for quite a long period of time. Charging the battery is easy enough: just screw it all the way into a USB device. The red indicator will light up. When the charging process is completed, the color will change to green.

Advantages of the CE 4 Clearomizer

Vape lovers consider this version one of the most successful. The resistance value of the filament is high (1.8 ohms). In addition, the device is practical, affordable and easy to use. It does not require cleaning or rinsing. When the clearomizer has exhausted its reserve (about 5-6 weeks), it is replaced with a new one. Note that most quitting smokers have enough of this time, and they do not need to be replaced at all.

This vaporizer is convenient and practical. The manufacturer has done everything necessary to prevent liquid leakage: the mixture is removed from the mouthpiece with an internal seal. When taken out to fill the clearomizer, the silicone tips prevent accidental spillage from occurring. The owners of the previous version noted some inconvenience when filling the mixture into the tank.

During this process or immediately after it, the slurry came out. As a result, hands and clothes got dirty with an oily consistency. Now engineers have eliminated this trouble. The connection points are reliably protected by silicone seals. This solution eliminated all sorts of worries and thoughts about leaks.

The algorithm is simple, since there is no need to unscrew the clearomizer from the battery. Just take off the mouthpiece. Filling the clearomizer:

1. to open the device, the drip-type is rotated counterclockwise;
2. the smoking mixture is never poured into the middle of the atomizer;
3. in the center there is an outlet - an air duct - the liquid should not penetrate there;
4. the liquid is poured into the clearomizer strictly along the wall at an inclination of 45°.

If you use and store the device correctly, then this becomes the guarantor of the duration of its use!

The ce4 electronic cigarette, the instructions for which will be presented to you today, will help you clarify the full picture of the technical characteristics of the device, if for some reason the electronic device came to you without technical documentation.

This device is quite popular, which means that there will be a lot of questions about it. And we will try to give answers to a number of them in this article.

The basic equipment of the eGo electronic cigarette consists of:

• clearomizers eGo-h2, eGo-CE4 - 1-2 pcs, or varieties CE4S, X65;
• battery with a capacity of 450, 650, 900 or 1200 mAh - 1-2 pcs;
• USB charger;
• network adapter for networks with a voltage of 220 volts;

This electronic cigarette comes with a CE4 clearomizer, which was very popular at one time. Its capacity is 1.6-2.0 ml, but as users note, it is highly recommended not to fill it to the limit. 1.6 ml is the optimal filling level.

This clear in practice showed excellent results both in low liquid consumption and in flavor transfer. One refill is enough for the whole day. Clearomizers of this model periodically need to be replaced.

The obvious disadvantages of this clearomizer include:

• impossibility of disassembly. Inability to replace the heating element;
• unpleasant fluid leaks;

A little later, the CE4S model appears on the market, which is already disassembled and has a replaceable core inside - a heater-evaporator.

Battery

The battery capacity, which will be equipped with the device, varies from 450 to 2200 mAh. The operating time of the electronic cigarette between full charges will directly depend on this number. In direct proportion to the capacity of the battery, its size will also increase. At the moment, batteries for 2200-3200 mAh are on sale.

If you still don't know how to fill a clearomizer...

In all new e-cigarette kits, for safe transportation, the battery is in a locked state. The lock is released by pressing the power button five times. If everything is done correctly, then the LED light will flash three times, signaling the release of the lock.

The first battery charge must take at least 8 hours. Even if less time has passed, and you see the green color of the LED, which indicates that the battery is fully charged, you still need to wait up to 8 hours for the first charge.

To prolong battery life, do not expose it to overheating or exposure to cold. It is also not recommended to keep the battery in places of high humidity and it is strictly forbidden to subject it to physical impact.

After the battery is fully charged, the process stops automatically. Typically, a full charge will take 2 to 8 hours, depending on the capacity of the battery you have selected. If, when using an electronic cigarette, the indicator light starts flashing quickly, this means that the battery is running out and the device needs to be recharged.

Disassembly and repair of an electronic cigarette

One of the common problems with this device is the problem that there is no voltage applied to the heating element. It is worth noting that if you are remotely familiar with physics, repair work related to electrical engineering, or are simply new to vaping, it is better to leave repairs to professionals. Independent attempts to repair an electronic cigarette or its components can permanently disable the device, and in the worst cases, harm your health.

And if you still decide to take on the repair yourself, then relying on the instruction manual, you need to first disassemble the device. This is no more difficult to do than devices with ugo-t batteries.

Tip - mouthpiece, Clearomizer - clearomizer, LED - indicator light, Battery - battery, Atomizer Head - atomizer.

It is the t series of batteries that has recently become popular among devices of this class. A distinctive feature of t-shek is a stylish design and small size. But the negative side of the t-shki immediately comes out - a small capacity. Ugo-t is more suitable for devices that girls will use.

To get started, to check the integrity of the spiral, we need to connect the multimeter probes to the minus and plus of the evaporator. One contact will be the case, the second - the center. The tester shows a resistance of 3 ohms, on a short circuit - 1 ohm. This may indicate that the spiral is intact. We carry out the same operation on the contacts of the battery.

We expose the measuring device to measure DC voltage, and press the button to turn on the device. In this case, the device indicates the absence of voltage.

Using a sharp knife, you must first remove the plastic tip from the battery, then do the same operation from the side of the contact group. This must be done carefully, since the connection is assembled very tightly and excessive effort can damage the structure.

Inside, everything is very simple. If you do not have voltage applied to the heating element, then one of the two wires that extend from the battery will simply be soldered off. 2 minutes of simple repair and your device will be operational again.

Conclusion

When attempting to repair any electronic devices, be extremely careful and careful. Attempted repairs may not only cause permanent damage to the instrument, but may also result in personal injury. If you doubt your skills and abilities even for a second, entrust the repair to professionals.

The ce4 electronic cigarette, the instruction manual for which was presented to you today, will serve you for a very long time if you follow all of the above rules.

In this article, we will present the CE 4 electronic cigarette and the instructions and all the technical characteristics of the device, if for some reason the ES came to you without documents. This device is quite popular, which means that many will be interested in it. And we will answer some questions about him today.

The basic equipment of the egoshka includes:

1. clearomizers eGo-h2, eGo-CE4 - 1-2 pcs. or CE4S, X65;
2. battery with a capacity of 450, 650, 900 or 1200 mAh - 1-2 pcs;
3. charger with USB input;
4. network adapter for 220 Volts;

This electronic is equipped with a CE4 clearomizer, which at one time made a hype. Its volume is 1.6-2.0 ml, but users do not recommend refilling it to the limit. 1.6 ml is the optimal filling level.

This clear in practice shows good results both in terms of low consumption of slurry and transfer of taste. One filling is enough for the whole day. Clearomizers of this model need to be changed periodically. The obvious disadvantages of this clearomizer would be:

1. inability to disassemble the device and replace the coil;
2. unpleasant fluid leaks;

A little later, the CE 4 S model came onto the market, which can already be dismantled and which has a replaceable evaporator heater. The battery capacity that comes with the device reaches 450-2200 mAh.

From these indicators depends on the operating time of the ES between full recharges. In direct proportion to the volume of the battery, its dimensions will also increase. To date, you can find power supplies for 2200-3200 mAh.

How to refuel the CE4 clearomizer

In all new configurations of its safety carrying arm, the battery is in a blocked state. The unit can be removed by pressing the power key 5 times. If you did everything correctly, the LED will blink 3 times. The indicator so says that the blocking is lifted.

The battery should be charged for at least 8 hours for the first time. Even after a shorter time, you notice the green color of the LED sensor, which indicates a full charge of the battery, then in the case of the first charge, wait 8 hours.

To prolong battery life, overheating or hypothermia must be avoided. Also, do not keep the power supply in a place with high humidity or subject it to physical impact.

After the battery is fully charged, the process stops automatically. As a rule, it takes 2-8 hours and is determined by the capacity of the battery. If during the operation of the ES the indicator starts to flash quickly, this indicates that the device needs to be recharged.

How to disassemble and repair it

A common problem with this device lies in the voltage supply to the spiral. Note that if you are not very versed in physics and electrical repair, or you are just a beginner vaper, then it is better to rely on professionals.

It is not worth trying to repair the ES or elements on your own, as the device can permanently fail, and in the worst case, harm your health. And if you still decide to repair it yourself, then based on the instructions for use, you must first disassemble the device. This is easier to do than devices with ugo-t batteries.

It is the t series batteries that have recently been gaining popularity among models of this class. A distinctive feature of t-shek is a stylish design and small dimensions. But immediately the disadvantage of the t-shki comes out - a small volume. Ugo-t is more suitable for devices designed for girls. The device consists of the following parts:

• mouthpiece (Tip);
• clearomizer (Clearomizer);
• indicator light (LED);
• batteries (Battery);
• atomizer (Atomizer Head).

Before starting work, check the integrity of the evaporative element, connect the multimeter probes to minus and plus spirals. One contact is the body, the second is the center. The tester will show a resistance of 3 ohms, in case of a short circuit - 1 ohm.

This, rather, speaks of the integrity of the spiral. A similar operation is carried out on the battery contacts. Set the measuring device to constant voltage and press the device on / off button. In this case, the device will show that there is no voltage.

With a sharp knife, remove the plastic tip from the battery and do the same from the side of the contact group. Do everything carefully, because the connection is tightly assembled, and excessive force can damage the structure.

Inside, everything is very simple. If voltage is not applied to the heating coil, then one of the 2 wires is coming off the battery or simply soldered off. A couple of minutes of simple repairs and your ego will work again.

Electronic Cigarette eGo - User Manual

WithClearomizer / Atomaizer ego-ce4, eGo-H2andhismodificationsGS-H2, X6S...

Please read the instructions carefully before using

Electronic cigarettes of the eGo series.

This model represents a new round in the development of electronic cigarette technology, and is simpler and more economical. There are no problems with application.

The battery supplies current to the heating element of the Clearomizer, the evaporation of the liquid begins. This is the vapor we inhale, with or without nicotine.

Electronic cigarette kit

1. - (1-2) piece or its varieties CE4S, X6S or others.
2. Battery - (450-650-900-2200) mAh - 1 or 2 pieces
3. USB charger - 1pc
4. Adapter for charging from the mains 220v
5. Liquid, need to order additionally

Additionally, see: upon request, you can order.

1.Clearomizer / Atomaizer

For an electronic cigarette, a CE4 clearomizer is used, and it was popular, at one time, containing 1.6-2.0 ml of liquid. Completely not recommended to refuel. Enough 1.6 ml. He has proven himself on the good side. excellent transfer of the taste of the liquid, low consumption of liquid, one refill per day is enough. Periodically, clearomizers need to be changed.

Flaws:

Not collapsible, it is not possible to replace the heating element

And nasty fluid leaks.

Later, its variety, clearomyer, appeared,

Collapsible with replaceable). It is easily disassembled, washed and replaced in an elementary way (the whole procedure takes 5 minutes). At times, it extends the life of the Clearomizer.

Butare gradually being forced out of the market, Clearomizers

Clearomaizer X6S

and their varieties, with a lower location interchangeable , heating elements (cores).

Its design,absolutely completely exclude leaks, liquid leakage, even upside down!

Note, refueling of eGo-H2 and X6S is made from below!

It is necessary to unscrew the base of the "cleric" and along the wall of the flask, add liquid.

2. rechargeable battery

Battery capacity is measured in mAh. Most often found from. The operating time of the cigarette depends on the capacity of the battery. But, accordingly, the size (length 60-116mm and diameter 11-18mm)

Now we have powerful

You can soar without recharging up to 2-3 days!

Constant output voltage: 3.3-4.2v. It has an indication of the remaining battery charge and protection against unintentional switching on (turn on and off by pressing the button five times), unlike previous models.

Note:

Removing the battery lock: During transportation (in all new sets), the batteries are in a blocked state. To put the battery back into operation, quickly press the power button 5 times. If everything is done correctly, the LED on the battery will blink three times, signaling the release of the lock.

ATTENTION!First battery charge, not counting the factory one, is at least 8 hours. Even if the green light on the charger lights up, do not disconnect. To prolong battery life, avoid excessive heat or high humidity. Do not disassemble it or subject it to physical abuse. The battery is equipped with protection against short circuits. Also, a special device is built into the battery that protects it from overcharging. Once the battery is fully charged, the process stops automatically. It usually takes about 2-8 hours to fully charge the eGo battery (charging time will vary depending on the type of battery selected). If during the operation of the cigarette the LED starts to flicker quickly, this means that the battery is completely discharged, and it must be urgently charged. Do not store batteries in a discharged state.

How to charge the battery.

To charge the battery, screw it into a USB charger, then connect the charger to a computer or through an adapter to a 220V network. At the same time, the LED on the battery control button will flash quickly 5 times, and the LED on the charger will turn red, indicating that the charging process has begun. As soon as the color of the LED changes to green, this means that charging is complete.

I recommend, before each charge, wipe the contacts on the battery and the clearomizer (from liquid residue, to improve traction), you can use a damp cloth, for convenience, use a wooden stick or a match.

3. USB charger, for battery

Input: 5 V, 500 mA. Output: 4.2 V, 420 mA. Suitable for any battery type eGo/510.

charges the battery faster than through the computer's USB and does not take up the USB connector on the computer.

Introducing the latest developments from Joyetech,

JoyetecheGoone, broke all records for popularity. They say about her:

"A killer is born, for electronic cigarettes, the EGO / EVOD / Twist series ...!"

This small cigarette (fits in the palm of your hand) is an easy-to-operate and powerful "vaping-smoking" machine designed for both beginners and experienced "smoker-vapers".

This "Product" is a game changer for the entire e-cigarette market!

eGoONEcomes with a choice of:

• 1100mAh - length and diameter: 58.5x 19 mm (2.30” x 0.75”)
• 2200mAh - length and diameter: (85.x 19)mm
• Atomizer - Capacity: 1.8ml, Size: (46 x 19)mm (1.81" x 0.75")
• Atomizer - Capacity: 2.5ml, size: (61.5x19)mm

Presented, 3 different sets in assortment and their accessories.We guarantee that these are originals.

Pay attention to sizes Ego One different modifications (complete cigarettes, together with the Atomizer), they are smaller in length than the usual eGo-Сe4 650mAh, but in terms of power, many times more, plus reliability and original design!

5. Liquid:

For refilling electronic cigarettes, they are used for every taste.

Unscrew, carefully turning (mouthpiece), for CE4 and drip from the bottle, but not in the central hole, but on the side, along the wall of the case.

Warning:

Nicotine can be toxic by inhalation, ingestion, or skin contact.

Nicotine has an irritating effect on the eyes and skin. - Nicotine is dangerous for pregnant women and affects the development of the unborn child. - If nicotine comes into contact with the skin regularly, it can cause irritation. - In case of an overdose of nicotine or if you feel unwell after drinking nicotine-containing liquids using electronic cigarettes, consult a doctor immediately (show him the cartridge if possible). - E-liquid residue and used cartridges must be disposed of in accordance with local waste disposal standards. After using an electronic cigarette, it is best to put it in a special place, protected from children.

All e-liquids containing nicotine must be stored in a safe place, out of the reach of children and pets.

Smoking an electronic cigarette:

Take the mouthpiece into your mouth with your lips and inhale the steam, at the same time pressing the power button. Steam will be generated as long as you keep the button pressed. Do not bite the mouthpiece with your teeth as this may damage it.

Warranty Batteries for electronic cigarettes of the eGo series are covered by a 3-month warranty from the date of purchase. Battery life with proper use can reach 1-1.5 years.

Preparation for use:

 Charge the battery.
Attention! The first time the battery should be charged continuously for 8 hours (even if the charge indicator is green). After the initial charge of the battery, the cigarette can be used for about 20 minutes, after which the battery must be charged again within 1 hour. In the future, the battery will be charged normally.
 Unpack the cartomizer.
 Unscrew the mouthpiece from the cartomizer.
 Fill the cartomizer: fill the cartomizer with liquid, being careful not to get into the central air duct, no higher than the upper mark of the graduation scale - 1.6 ml.
 Screw the mouthpiece into the cartomizer.
 Screw the filled cartomizer into the charged battery.
 The electronic cigarette is ready to use.

Usage:
While puffing, press and hold the button on the battery. Release the button when finished tightening. It is not recommended to keep the button pressed for more than 10 seconds to prevent overheating of the cartomizer.

3-click protection function
This model of electronic cigarette is equipped with a battery with a shutdown function to avoid the risk of accidentally pressing the button and turning on the device. To do this, press the button on the battery 3 times within 3 seconds. The inclusion of a cigarette is done in a similar way.

During operation, the Electronic Cigarette signals the discharge of the battery by flashing the indicator light. The average battery charging time is 2-3 hours.

Precautionary measures:
• Do not charge the battery near heat sources.
• Do not charge the battery outdoors or in a humid environment.
• If the battery emits a strange smell, changes color, temperature, becomes deformed, or changes in charging time, immediately disconnect it from the power supply or other parts of the electronic cigarette.
 Do not disassemble the battery.
• Do not use the charger of this cigarette model to charge other types of electronic cigarettes.
• Do not allow the cartomizer to overheat.
 Do not expose the device to direct sunlight or high temperatures.
 Keep the Electronic Cigarette out of the reach of children and animals.
• Avoid close contact of charged batteries with metal objects. Metal objects can cause a short circuit, extreme heat, or damage to the battery.
 Store all parts of the Electronic Cigarette in a dry place at room temperature.
• If the Electronic Cigarette is not used for a long period of time, do not keep the battery connected to the charger.

Electronic cigarette care:
 The electronic cigarette requires regular maintenance. Regularly wipe the threaded connections of the cartomizer, charger and battery with a cloth dampened with alcohol to improve electrical conductivity.
 Replace cartomizers regularly.