How and when to prepare brooms for a bath. When is it better to prepare brooms for a bath? When to break birch brooms for a bath?

@emelyaelya

The time to collect material for bath brooms in Russia is subject to special canons. The main thing in this matter is not to rush and not to be late. Everyone who loves Russian baths knows about the importance of timing the collection of birch, oak or linden branches for the preparation of this bath attribute.

When does the harvesting of birch brooms begin?

If in the Krasnodar Territory birch branches should be cut at the end of May - beginning of June, then in the regions of the Southern Urals this is done at the end of June - beginning of July. Residents of the middle zone focus on the Orthodox holiday of Trinity. This holiday does not have an exact date; it occurs 50 days after Easter. In 2019, the holiday falls on June 16.

A couple of weeks after Trinity and before Elijah’s Day, you need to cut the branches into brooms. The harvesting period is different everywhere, but you can also focus on the condition of the birch branches.

The most common type of birch to collect is drooping or downy. These are white-trunked trees that grow up to 30 m in height. The branches are long, like those of a weeping willow. Small wedge-shaped rounded leaves frame its twigs in abundance. You need to be in time before the tree blooms, but wait until the leaves have formed. Their color will take on a lasting, rich green color. A sugary coating can be seen on the surface of the leaf with the naked eye. It indicates that the time has come.

Where is the best place to collect twigs?

The choice of location for collecting material for birch brooms is important. We go into the thicket away from the road, choosing shady places, lowlands and the river bank. A tree from which twigs can be cut must have sufficient moisture in the roots. In this case, the leaf will not be deprived of nutrients.

When choosing a tree, it is important to examine not only the crown, which must be of the correct shape, but also the trunk. There should be no strange discharge or growths on it, except for the chaga mushroom. If there is no forest nearby, then you can choose birch trees growing in the park area. Lovers of bathing procedures with experience have long chosen the tactic of planting their own sources of raw materials - birch trees decorate the area near the house, in the country or in an urban residential area.

If you prune an adult tree, you need to do it in the middle part of the tree. The lower branches are old, and the upper ones are still young.

Preference should be given to 2-year-old trees that do not yet have earrings. These are the juiciest twigs suitable for bath procedures. Not only do their mature leaves have a full range of essential oils, but also their young shoots. Substances contained in birch shoots:

tanning;
essential oils;
coumarins;
flavonoids;
saponins;
potassium, magnesium, calcium, iron, manganese;
acids – ascorbic, nicotinic and betuloretic;
provitamin A and vitamin C.

Therefore, a properly cut, collected and dried broom is not only an excellent massage tool in the bathhouse, but also a healing agent. Asthmatics, allergy sufferers and those with bronchial problems can appreciate the healing properties of this birch product.

How to properly cut birch branches?

You can cut branches when preparing a birch broom for a bathhouse using anything. Secateurs, garden shears, or just a sharp knife are suitable for this purpose. It is important that the cut is smooth and neat, this will help not damage the trees. It is necessary to cut not from one place, but evenly from different sides. Young branches with 2-3 branches, densely strewn with leaves, are suitable.

The length of the cut rod is 0.5-0.8 m. In clearings, you should pay attention to the growths near the stumps. Here, within 2-3 years, the shoots become small trees. Collecting such material will not harm the forest area. Thin young branches will not lose their flexibility after proper drying. This will allow the bathhouse attendant to make gentle whipping movements without causing pain to the person receiving the procedure.

How to knit bath brooms?

After collecting the material, it’s time to start knitting brooms:

we lay out the collected branches on a small area;
we sort, putting large, branched and straight stems into separate groups;
on large branches we use pruning shears to get rid of knots;
We begin to collect the branches like a bouquet - in the middle the branches are large and branchy, at the edges straight and thin;
just above the edge of the intended handle we tightly grab it with twine;
fan out slightly;
Having removed the leaves, lightly tighten the broom handle in 2-3 places with twine;
on twine, near the end of the handle we leave long ends (5-7 cm each);
so that the upper part does not change shape, you can hold it by pressing it with your knee;
straighten the lower edge of the handle, and remove or loosen the first string.

When making a broom, you can add oak or linden branches to it. Weave herbs inside - mint or thyme. Such combined compositions increase the beneficial properties of a steamed bath massager several times.

How to dry?

When the process of forming the brooms is completed, we begin drying. For this:

lay them out on the floor or other flat surface in rows;
avoid direct sunlight or strong drafts,
every other day we turn them over to the other side;
after the brooms acquire a flat shape, they are hung;
we tie them in pairs using the twine tails left at the end of the handles;
hang brooms on a horizontal pole or stretched wire;
make a slight shift - one is higher, the other is slightly lower;
choose a well-ventilated place and leave it like that until it dries completely.

A dry broom should have a persistent light green color and a pleasant smell. When pressed, the foliage does not crumble into small components.

Storage rules

Finally dried brooms must be stored in the same pairs. If the bathhouse has a large dressing room, you can remove them from the wire and hang them there on nails. So they are always at hand, emit a delicious smell and serve as an original design for the dressing room.

A dry barn or hay barn is also suitable for storage. Birch pairs can also be stored in hay. Under the top layer of hay we lay them in a circle with the foliage inside the circle. Large paper vegetable boxes are good for storage; they can be stacked, the main thing is that they are stored in a dry and cool place.

Mistakes when preparing bath brooms

If hay is prepared using the saying: “Mow while there is dew,” then with birch it’s the other way around. What not to do if we want to get a good broom:

do not cut wet branches until the morning dew has disappeared;
do not take stems with damaged, pale or rough leaves;
after the rains, wait a couple of days until the birch crown dries out;
refuse to collect shoots that are too young; they can be identified by a light, unformed leaf;
when tying a broom, do not thicken it and do not immediately tighten the twine;
the optimal length is 50-70 cm (including the handle, which is 1/3 of the length);
the weight is selected individually so that even the flimsiest steamer can whip without getting tired;
when storing in the attic, do not hang it right under the roof, it will heat up and “burn” the sheet;
do not cover the finished brooms with half-dry hay, they will rot;
before use, the handle must be tightened with a rope and wrapped with a rag for convenience;
Do not use wire for knitting, so as not to injure or burn your hands.

How to steam bath brooms correctly?

Let's highlight several ways to steam a broom:

a dry broom is immediately steamed with boiling water for 15-20 minutes;
perform preliminary soaking 24 hours in advance, keeping it in cold water for 2 hours, and then storing it in a plastic bag until pouring boiling water;
pour hot water for 20-30 minutes, and then for 10-15 minutes. immersed in boiling water.

Let's take a closer look at each method:

By pouring boiling water over dry leaves, we will make the broom short-lived. A normally prepared bath massager can be used at least 3 times, or even more. Express brewing will save time, but will remove most of the nutrients from it into the water. The subtle aromas of the added seasonings will mingle.
Pre-soaking in cold water will infuse the branches and leaves with moisture. This will allow them not to crumble when used and to withstand boiling water stress. The pre-soaked bouquet should be stored in a cool place. Many bathhouse attendants put the bag in the refrigerator. Not in the freezer compartment. This method allows you to use it several times.
The combination of “hot water - boiling water” is most suitable for preparing for bath procedures. The broom becomes elastic, the leaves hold tightly, and you can safely use it several times. After the bath, it is washed in clean water and dried in a dry, ventilated place. This could be a dressing room with good ventilation. You should not leave it on a shelf in a steam room, the residual temperature will dry out the top layer, and the entire structure of the sheaf will lose its integrity.

Separately, I would like to highlight the method that many people who like to take a steam bath use. The process of steaming when heating the bath. After the first warm water appears, fill the broom with it for 10-15 minutes. The leaves straighten out. If the container allows, then it is lowered there with the handle down. This way moisture will penetrate the stems faster through the cuts.

After this soaking, the broom is tightly wrapped in a bag and placed on the top shelf of the steam room. It lies there until the bathhouse is ready. Then it is immersed in hot water (80-90ºС, boiling water is not used). While the steamers are waiting for the 13th drop from the nose, the broom manages to reach the desired condition. This is an experimentally tested method that allows you to extend its service life.

The first warm water is used for pre-rinsing before the steam room. Or you can leave it for the final rinse after washing. Then the body will smell of birch aroma. Even dried out brooms can be restored in this way and used several times.

Preparing brooms is voluntary. You can buy a ready-made one at a price of 150-250 rubles per piece, or you can assemble your own and enjoy it for free. It is advisable to prepare brooms with a reserve, then you will not have to save money and reduce the number of trips to the bathhouse.

Discussion 0

Similar materials

There is nothing complicated in preparing brooms for a bath, but, as in every business, there are some nuances: you need to know when it is better to knit brooms for a bath, which branches to choose, how long they should be, how to preserve brooms for the whole year without losing quality .

When to knit brooms for a bath

Our ancestors prepared raw materials for bath brooms in the first half of June - on Trinity Day after Green Christmastide. If you are far from church calendars and rituals, collect branches in early June, when the foliage has already grown and become stronger, but has not yet become faded and withered.

For church holidays or calendar dates, you can only focus on regions: our country is large. In some places it’s almost summer on Trinity Sunday, and in others the leaves have barely sprung. So it’s better to focus on the condition of the foliage.

When are birch brooms harvested?

Not much time is allotted for harvesting birch brooms: a week at most. You need to have time to prepare birch branches when the leaf has already turned green, and not light green, but before the earrings bloom. If time is missed, the foliage becomes very hard and falls off greatly in the bathhouse. So the harvesting period for birch brooms is very short.

But time is not the only criterion. When choosing branches for a birch broom, you need to be guided by the appearance of the leaf. It should have a deep green color, the plate should be smooth. There should be no aphids or other pests or diseases. But, most importantly, there should be no earrings on the branches. And for greater effect, you need to cut birch branches with a broom during the specified period, but after a rain. Only the birch must already be dry, otherwise when steaming the leaf will darken and curl.

More advice from the older generation: cut a broom when the leaf on the birch tree is no larger than an old five-kopeck coin, and it should feel slightly sticky to the touch.

But with sticky leaves you get a “soapy broom”. It has an excellent effect on the skin: it becomes silky and soft. But at the same time, leave the steam room with your skin covered in mucus. Not everyone likes this feeling. So here you have to choose: either more comfortable sensations with more “mature” foliage or elastic skin.

Birch brooms harvested in May smell differently than summer ones: they add a smell very similar to the smell of propolis. At this time, there are light stripes on the skin of the twigs, which release this aroma. Such stripes are not found on all branches; they need to be selected separately. Running your hand along such a branch, you feel the tubercles - these are the very resinous odorous secretions. If anyone hasn't tried it, try it. Very pleasant sensations, although the sheet is sticky at this time.

Some bathhouse lovers especially appreciate birch brooms that grew near water - a river or lake (but not in a swamp). Such plants have long, elastic and flexible branches. Twigs, growing roots or stumps of birch trees are good. They are flexible, elastic and tender.

On trees, the lower climbing shoots are considered the best. They are cut for a broom. It is better not to cut single young ones without side branches, even despite the large, beautiful and dense leaf: it turns out to be a whip. And this is not at all what is required from a bath broom.

If you don’t need to cut more than two or three pieces of a young tree, you can harm the plant. Know when to stop - take care of nature!

Old people who love baths say that even in a birch grove you can’t take branches for a broom from every tree. But only from those whose birch bark on the trunk seems to shine a little. Moreover, the spots on the birch bark are not gray, but rather brownish in color. There are not very many such trees, but they exist. Try to find at least a few and stack the branches separately. Then evaluate the difference and next time you won’t regret it.

When preparing brooms, birch foliage should be dense and smooth. Some people recommend trying a birch leaf with your tongue. If it is rough, the branch is not suitable, if it is smooth and velvety, it is an excellent raw material.

You can navigate by the stem of a young birch leaf. If it has already turned reddish, you can cut it, but if it is green, it’s too early.

The video shows how to choose birch branches and correctly knit brooms from them.

We prepare oak brooms

The harvesting period for oak brooms is longer: starting from the end of June, and some are harvested in August and early September. Depends on the year and region. But even in the same region, it differs greatly from year to year. In some areas you have to hurry: later the foliage is affected by diseases and becomes lethargic or spotted. But sometimes, after disease damage in August-September, the foliage on the oak tree grows back. Then you can also get excellent brooms.

When harvesting an oak broom in the summer, pay attention to the condition of the leaf: it should be an even, dense green color, without spots. The main rule: there should not be an acorn yet. As when harvesting birch, branched shoots with large leaves are taken.

But there are lovers who harvest oak brooms in September. In this case, the leaf turns yellow or yellow. They say it also “works” very well.

For gourmet bathhouses, oak brooms, made from tree branches near which burdock grew, are highly prized. Their shoots are considered the most durable and flexible. Trees should grow in shady corners of the forest and be young: on old ones it is difficult to find non-knotted branches of sufficient length. The foliage should be large and abundant.

The preparation of oak brooms has its own specifics:

firstly, the cut branches are stored in a shady place for an hour and a half, and only then can they be transported;
secondly, after the oak broom is tied, you need to put pressure on it to give it the shape of a fan - this shape is the most common, but some people prefer oak brooms of the traditional spherical shape.

When to cut linden brooms

If you want a linden broom with color, you have a week and a half to prepare it. And that’s due to different species blooming at different times. In general, the best period is considered to be when most of the flowers have already opened. The aroma in the bathhouse is amazing.

Linden with flowers smells amazing, but they won’t be able to “work” properly - the leaf is soft

There is a linden broom and a later preparation. He also has a period of two weeks - from August 15 to September 1. This is what experts say, who claim that previously collected linden branches contain, of course, more useful substances, but the leaf on them is too soft and, when steamed, curls and wrinkles so that it is absolutely impossible to steam with it.

Preparation of coniferous brooms: spruce, juniper

The “widest collection range” is found in coniferous species. There are no restrictions here. In Siberia, coniferous brooms are made both in the most severe frosts and in the summer...

Choose a warm, fine, dry day for harvesting. The branches begin to be cut after the dew has dried. They choose the young and flexible. There are no other recommendations.

How to make nettle brooms

Despite the “terrible” sting, you just need to try the nettle broom. Then you will really enjoy steaming with it. Harvesting them for the winter is problematic, except perhaps inserting a few branches into birch and oak trees. No other way. But you can steam fresh all summer long.

Young shoots without color, about 40-50 cm long, are cut off. They are made short and fluffy. It’s better to work with gloves: it stings. It turns out to be quite soft: only for one person.

There are quite a few ways to steam a nettle broom. Basically, they dip into hot (not boiling water) water for 3-5 seconds, then into cold water. All.

The second option is to dip it in cold water, then after steaming, trample on it in the steam room with your feet, hold it over the steam, adding a ladle of water.

Regardless of how you prepare the broom, they need to “work” on the already steamed body. That is, you first need to steam with birch.

There is one thing about using a nettle broom: it strongly stains the wood. Therefore, it is better not to put it on the shelves. Bring a rug and place it on it.

All other brooms (and what they are like and how they affect the body, read the article “How to steam a broom for a bath”) are collected in the same time frame as birch brooms until August 2.

If you want to knit a broom from herbs, you need to know the timing of its flowering - at this time they have the highest concentration of useful substances.

How to choose branches for a bath broom

Branches are cut from young trees that grow in sunny, non-wetlands, away from roads and enterprises with harmful emissions.

The length of the branches is selected depending on the selected broom size. Usually it is from 40 to 70-80 cm. Whichever is convenient for you. The thickness of the handle is selected in the same way. The diameter rarely exceeds 5 cm - it is difficult to swing too large and heavy, although it is a matter of taste and habit.

The branches should be smooth, free of diseases and dried parts. The foliage is thick and juicy, not too tough. It is advisable to choose branches with two or three branches - the broom will not only be more magnificent and beautiful, it will also be denser and will “capture” steam well. When you walk over your body with such a broom, you do not whip it, but massage it.

How to knit brooms for a bath correctly

Having selected suitable branches, you can immediately collect them into brooms. Some bath lovers advise pre-soaking them for several days in an unlit, well-ventilated place. They say the branches need to be “withered.” It's easier to work with them then.

The shoots are thicker on the inside and thinner on the outside. If there is a bend on the branches (and most often this happens), then the bend should point inward. Also make sure that the matte surface of the sheet is directed inward, and the shiny surface is directed outward. It should turn out that their shiny side is directed in one direction. When folding, give it the shape of a fan or a “bouquet” - they do it in different ways. The fan broom is more common: it seems to hug the body. The feeling is pleasant.

For the handle, remove the foliage from the bottom. Its length is selected individually, but the most optimal, established experimentally, is two palm widths. It is also necessary to expose the butts of the branches so that the brooms are better preserved during use. If everything is done correctly, then one broom can be enough for two trips to the steam room.

When folding the branches, they are turned over and shaken several times so that they are distributed more evenly. For knitting, it is better to use natural materials: thick twine, hemp rope, medical bandage or other similar materials. It is better not to use metal wire: it heats up in the bathhouse and such a broom is very uncomfortable to hold in your hands.

There are several knitting techniques:

Used for knitting and clamps. Some are plastic, some are metal. They quickly tighten the handle and hold it tightly. Moreover, after drying, it will be possible to tighten it. To prevent all these puffs from rubbing your hand, then wrap the handle with thick cotton tape: sold in hardware stores, sometimes in hardware stores or haberdashery stores. You can wrap the handle with thick cotton rope (after using the broom, you can remove it and tie the next one).

There are still many ways to knit brooms. Some people use nautical knots, which make it possible to tighten the rope after drying, others place two parts of the branches crosswise with the butts, then tie them not very tightly, then forcefully connect the two parts and tie them finally at the butt and higher. Almost every master has his own secrets. But they are very reluctant to share them. Try simple methods first, then adjust as you like. There will be your personal method of knitting a bath broom.

Proper drying

No matter how you knit the brooms, they still need to be dried. They are immediately piled up, one on top of the other. They stay like that for a day or two. They become flat under their own weight. Then they can be tied in pairs and hung on a rope or pole in a dark, well-ventilated room.

If it is possible to hang brooms in the attic, they can be tied in pairs (without cutting off the remaining twine for tying) and hung to dry on poles. The best brooms are made under a double roof: the heat will not “burn” the leaf, but will dry it out. But ventilation must be good. If you don’t have the luxury of your own attic, you can hang the broom on a nail in a well-ventilated place. In any case, you need to find a room where it is not exposed to direct sunlight. Only under such conditions the leaf remains green and does not fall off.

With any drying method, the brooms should not be placed close to one another - there should be free space between them. At first, in order for the branches and foliage to dry evenly, they need to be turned over once or twice a day. When they are completely dry, they can be stored.

How to store bath brooms

Dried brooms can be stacked on a bookcase or shelf (the room again should be dry and well ventilated). But from time to time, the brooms need to be rearranged so that those located at the bottom are in the middle or at the top. Moreover, the brooms should not be exposed to light: the leaf will turn yellow.

If you have your own hayloft, you can stack the brooms on dry hay, placing them loosely next to each other. Cover the top with dry hay. This is how our ancestors kept them.

For apartment dwellers, there is also a storage method: make small holes in a cardboard box, put brooms into it without crushing it, alternating the handle and the crown. In this case, you also need to periodically shift them, lifting the bottom ones up.

You can also store brooms in the refrigerator: they are packed in a plastic bag or wrapped in cling film, placed on the bottom shelf, in a dark, dry corner.

As you can see, tying a bath broom yourself is not difficult. But this is just the beginning. Brooms, even the most wonderful ones, can be ruined by steaming them incorrectly. Read here how to avoid such trouble. Don’t forget to read the article, “How to take a steam bath properly.”

When to knit brooms for a bath: collection of raw materials and beneficial properties of plants

A broom is the basis of a Russian bath; of course, it can be purchased in a specialized store, but it is much better to prepare it yourself. Then there will be complete confidence that the raw materials are collected according to all the rules and contain the entire complex of useful substances. Knitting brooms for a bath can be combined with a trip to nature.

Harvesting must be carried out within a certain period of time, otherwise it will not be possible to achieve the desired effect. Many types of trees and medicinal herbs are suitable for the broom. The main requirement is that the plant grows in an ecologically clean area, away from roads and populated areas.

Which plants are suitable for knitting brooms: the period of collecting raw materials

One of the most popular plants in Russia is birch, but it is not the only one suitable for knitting brooms.

There are traditional types:

Oak;
Linden;
Juniper;
Eucalyptus;
Tansy;
Artemisia;
Rowan;
Nettles;
Spruce

Each of them is endowed with various beneficial properties aimed at restoring body functions. The quality of the future broom and its durability directly depend on where and when the raw materials were collected.

Birch: collection time and beneficial properties

This plant is rightfully considered the best participant in bath procedures. It has a gentle effect on the body. The collection of raw materials begins in mid-June and continues until August 2. Young flexible branches of weeping birch and curly birch, growing on the banks of reservoirs, are best suited.

With your own hands, cut only side shoots about 50-60 cm long, without touching the tops of the trees. Harvesting at the beginning of summer is quite justified - by this time the foliage has already absorbed sufficient nutrients and is filled with essential oils.

What are the requirements for birch branches and leaves:

The age of the tree should not exceed 2-3 years;
The outer side of the leaf is tender and smooth; the rough ones will make a rough and hard broom;
The leaf size is small to medium;
There should be no knots on the branches.

Only a dry day is suitable for collection; if it rained the day before, you will have to wait a few days.

What effect do the substances contained in birch leaves have on the body:

Relieves aches in muscles and joints;
Eliminates skin irritation, cleansing it well;
Wounds heal several times faster;
It has a positive effect on the respiratory tract - very useful for experienced smokers and asthmatics.

Note!
The infusion left after steaming the broom is very beneficial for the scalp - it relieves itching and eliminates dandruff.

Oak broom: when to collect

The second most popular tree after birch is oak. It is harvested in July-September; “winter” is most suitable - it does not shed its leaves and, accordingly, is more durable. If you are lucky enough to find a tree growing in a dense darkened forest next to large burdocks, then the branches from it are also suitable for collecting - the leaves from them do not fall off for a long time.

The most popular species can be called pedunculate oak - this is the most common, it grows throughout Russia. Young trees 3-4 meters high are suitable; small plants should not be touched - they may die. Plants should be given rest and brooms should be harvested from them no more than once a year.

The earlier the broom is prepared, the more tender the foliage, but it will also be less durable. They cook them until the first frost, then they can no longer be cooked. But the optimal time ends in September, then the quality of raw materials drops.

To know how to properly knit oak bath brooms, you need to understand their beneficial properties:

Unlike birch, oak does not cause profuse sweating, therefore it is more suitable for those with oily skin;
The skin becomes denser, tannins and essential oils cleanse, have bactericidal properties and impart dullness and elasticity, preventing aging;
People prone to high blood pressure and heart disease can steam with such a broom - it calms the nervous system and helps reduce blood pressure;
Has a strong anti-inflammatory effect.

Brooms are knitted in two ways: with a shovel and with a ball. This does not affect the properties in any way and depends on personal preference.

Features of preparing brooms from other raw materials

Not only ordinary trees and shrubs can serve as raw materials for bath brooms. For them, medicinal herbs are used, which are not necessarily used as decoctions or tinctures. One of the treatment methods is to “drive” them into the skin.

To do this, herbs are collected and tied into bundles by type or prefabricated brooms are made. To select the right herbs, you need to know when to collect them and how to knit brooms for a bath, combining different raw materials. Each medicinal plant has its own collection period. It is at this time that it accumulates the maximum amount of useful substances.

For brooms, flowers and leaves are prepared on a long stem so that they can be tied conveniently. They are collected by hand; the plants must have no signs of wilting and grow away from roads.

Suitable for use in a steam room:

Tansy - collected at the end of summer, dried in the shade. Brooms made from it help cure skin diseases and joint pain;
Wormwood - brooms can be knitted all summer, but the best time for collecting is June. It relieves irritability and improves sleep;

Nettle – young plants are harvested in May. At this time, it is not particularly hot and can be used even fresh. The plant has a tonic effect;
Yarrow - collected during flowering, used in combination with other herbs. Relieves skin irritation;
Chamomile – it is harvested in June. Bunches of the plant are tied into bath brooms made of birch or linden. Soothes and disinfects wounds.

Note!
Medicinal herbs as bath brooms should be used only after consultation with a doctor, and if there are no contraindications.

If the time of collecting medicinal herbs and other raw materials for brooms coincides, then they can be dried together. You need to know how to properly tie a broom for a bath if it contains several types of plants. Herbs are usually placed in the middle and hidden by the main branches.

Before harvesting and knitting brooms from different plants, you need to familiarize yourself with their beneficial properties, which are described in the instructions for use. Medicinal raw materials are dried and stored for no more than one year.

When knitting brooms from pine needles and eucalyptus

It makes no sense to harvest branches of coniferous trees for future use, because when the needles dry out, they fall off. Therefore, real experts and lovers of steaming cut off the branches immediately before going to the bathhouse. As a result, you can use fresh brooms throughout the year. The exception is juniper, but it is not stored for long.

How to knit bath brooms from coniferous plants so that excess resin does not interfere with steaming? They must be arranged in a certain sequence: thick branches are laid inside, and the outside is lined with flexible and thin ones. It is useful to add branches of other plants and wrap them with a rope; they will cover the handle and the resin will not get dirty.

Branches of some trees that do not grow in central Russia are harvested until the end of November. For example, eucalyptus, whose leaves are just gaining full strength by this time. Dry the raw materials at a temperature not exceeding 35 degrees, in the shade. For greater safety, they are packaged in paper or cloth bags.

Eucalyptus brooms help in the treatment of skin and colds and stimulate the immune system. Since its branches are very thin and flexible, it is advisable to combine it with birch. The price for them depends on the size and length of the branches.

Conclusion

Bath brooms are used for medicinal and cosmetic purposes. The time for harvesting raw materials for bath brooms varies depending on the plant, but to a greater extent it occurs in May-September, with the exception of needles. It is during this period that the accumulation of useful substances takes place.

In order for bath procedures to bring joy, it is important to knit brooms correctly and store them. The video in this article will tell you about when and how to collect herbs and tree branches.

Preparing bath brooms: combining business with pleasure

Healing properties

Steaming with a broom is a native Russian tradition that has many advantages. The preparation of brooms for the bath lasts from May to the end of August and depends on the branches of which bush or tree they are made from.

General rules for preparation, knitting and storage

It is best to use fresh twigs, they contain more phytoncides, essential oils and other active substances. But, out of season, you have to take previously prepared brooms with you to the bathhouse.

In the central part of Russia, the main preparations are made in May-June. During this period, trees, shrubs and herbs bloom, the leaves have already become stronger, have collected juice and have the greatest aroma.

Advice from the master!

Branches should be cut in dry weather. Even slightly wet leaves from rain or dew will quickly curl, fly off or deteriorate. Cut material should be stored in the shade. Under the influence of direct sunlight, beneficial essential aromatic substances will disappear from them.

Briefly, the rules for preparing brooms for a bath are as follows. There are several methods for drying tied branches.

You can do this in a dry and dark part of the attic of a house, bathhouse, or garage. But a small pile of hay is best. In the city, brooms can be stored on loggias, balconies or mezzanines in paper bags.

You can dry them on the roof of the barn:

Spread meadow hay on it
Place branches on it at small intervals from each other.
Cover them with a layer of hay on top
Turn the branches over every 3 days for a month

Then cover them with fresh grass and leave to dry until early October. In the fall you can start tying brooms.

As a rule, “bouquets” are stored on a rope, tied in pairs. But you don’t have to knit them right away, but make small sheaves from the twigs. They are placed in the attic or barn, wrapped in hay. Before visiting the bathhouse, take out a few twigs from the sheaf and tie a broom.

This is how it should be done. Place thicker branches inside, they will serve as a base. Around them, in a bend inward, distribute thinner branches.

Remove twigs and leaves from the handle of the workpiece in advance. Make the broom light so that your hand does not get tired when using it. After collecting the branches, wrap them with twine, and to avoid injury, cover the handle with a thin cloth or bandage.

Return to content

How to make “bouquets” for a bath from various plants

Birch brooms are harvested until mid-June. It is better to cut the branches immediately after the dew has disappeared.
Young weeping birch is most suitable for harvesting. It’s good if it has never bloomed before, such a tree has delicate leaves.

For a broom, choose straight, thin, long and flexible branches. Try to cut them from birch trees that grow next to the pond. To prevent the tree from dying, take only side branches or shoots at the roots.

Loosely tie the workpieces and hang them under a canopy on a rope or in a room that has good ventilation. Make sure that the branches are not exposed to the sun's rays. After a week, tie the dried pieces tightly and place them in a ventilated and dry room.

The finished broom should have a matte green color. It should give off the smell of birch balsamic oil, which intensifies in the steam room.

Almost all summer is suitable for collecting oak branches. Cut them from oak trees that grow in a damp and dark forest or oak grove. Oak brooms are knitted and dried in the same way as birch brooms.

Eucalyptus leaves are used for eucalyptus preparations. Branches are cut in August. It is recommended to include them in regular birch or oak “bouquets”.

Cherry and currant preparations are made at the beginning of summer. Unnecessary young shoots and growth at the roots are cut off. Linden, alder, and rowan branches are best prepared from July to mid-August.

Coniferous brooms are cut at any time of the year and used immediately. They are not suitable for storage because the needles fall off quickly.

Nettles are stored before and during the flowering period, in July. But wormwood brooms cannot be made while the plant is flowering. Otherwise, you will experience skin irritation after the steam room. Harvest stems that have already faded, but are strong and not withered.

Advice from the master!

Now, especially important tips for preparing brooms for the bathhouse. Please ensure that the bushes, trees and grasses from which you will make the fan grow as far as possible from factories, roads, and oil pipelines. It is not recommended to transport branches tightly packed, otherwise they will overheat and the leaves will fall off.

We built a bathhouse on our summer cottage and really want to start using it next season.

And, of course, we need brooms. Where is the best place to get them, what raw materials should they be from? How to knit and store them?

Igor Sergeevich DUBOV, Pskov

Although they say that there are no generals in the bathhouse, real steamers consider a broom to be such. It enhances the effect of the procedure by promoting greater opening of skin pores, regulating the distribution of heat over the surface of the body, massaging its surface and removing even deeply ingrained impurities.

The right broom contains phytoncides - specific organic substances that destroy viruses and microbes. Evaporating, they enter the air of the steam room, giving you the opportunity to breathe the cleanest air. And the essential oils contained in the broom penetrate the skin and produce a rejuvenating effect. By the way, it can be strengthened by adding medicinal herbs to the broom.

Now let's figure out where to get brooms. The simplest thing is to buy it near the bathhouse or in a specialized department of the store. However, there will be no confidence in quality, because it is not known how and when the branches were cut, or in what conditions the raw materials or finished products were stored. The best option would be to purchase brooms from “your” seller, the quality of which you have no doubt about.

What are bath brooms made from?

Many people prefer to cut the brooms themselves. But for this you need to have conditions for their storage, as well as know certain harvesting rules.

First of all, you need to determine what to make brooms from. Now the raw materials used for them are birch, wild rosemary, oak, heather, linden, maple, chestnut, poplar, viburnum, willow, alder, hazel, rowan, ash, eucalyptus, conifers, juniper, laurel, currants, cherries, sweet cherries, plum, lilac, bird cherry, nettle, fireweed. In addition, you can make all kinds of mixes (mixtures) both from traditional crops and by weaving medicinal herbs into them.

Raw material collection time

The timing of cutting raw materials is of no small importance. In the Orthodox tradition, the period for preparing brooms is a period of two weeks after Trinity (50 days after Easter), but I believe that since Easter moves annually according to the calendar, this guideline can be used conditionally - to the extent that you trust folk signs and traditions In fact, one must proceed from the actual phase of crop development, which depends on a large number of factors (soil conditions, average temperatures, abundance of precipitation, etc.).

Since brooms are made from various trees and crops, the harvesting time will depend on the selected source material. For example, the last ten days of June and the first ten days of July are ideal for harvesting birch brooms - the leaves are in their sap, the concentration of nutrients is at its peak, and the branches are quite flexible and strong. The best time for heather is from mid-May to mid-June; the same period is acceptable for making viburnum brooms. The time for harvesting oak branches is August and September. Willow reveals its qualities best in May.

The best time for maple is from late August to early September. Linden must be harvested before active flowering (May-June), then you can be sure of the maximum healing effect. It is best to harvest nettle brooms at the beginning of summer, as later the plant becomes coarser and loses some of its leaves.

The good thing about juniper brooms is that they can be prepared at almost any time. But if it is not possible to get to this plant in winter, you can collect its branches for future use during the summer. Alder is harvested from May to July, and rowan - in June and July, at the same time you can harvest lilacs and bird cherry.

It is better to prepare a plum broom in early June. Currants and cherries can be used fresh all summer, and are best harvested in June-July. Personally, I use cherries throughout the period while they are covered with leaves. I tear off a couple of branches and steam them together with the main broom, and when it’s time to steam, I apply the cherry to a broom from another crop.

Rules for preparing bath brooms

It is best to harvest most crops in dry, sunny weather - branches collected at this time hold the leaves better. The best time to go for brooms is in the morning, but after the dew has fallen. Remember that in the forest you should not stop at one tree and pick it. what is called sticky: it can harm him. So take your time and your legs, walk around and try to cut branches from as many trees as possible.

It is best to use the middle part of the tree, where the branches are already quite strong, but still retain their elasticity. Preference should be given to two-year-old trees.

When harvesting branches, do not break them with your hands, but use a sharpened pruner. Cut branches 50-60 cm long, although this will depend on your preference for the length of the broom and how the leaves have grown at the time of harvesting.

There are two ways to prepare brooms: the first is when the branches are not knitted immediately, but are collected into a large sheaf, which is stored in a special place, and only before going to the bathhouse, part of the shoots is taken from it for knitting a broom: the second method is the immediate “release® of the finished “ products”, which is convenient to take to the bathhouse without additional hassle.

The “firm” knits brooms

Regardless of the chosen harvesting method, before you start knitting a broom, you need to clear the branches of twigs and leaves where the handle will be located (about a third of the length). Then they begin to assemble the broom - thicker and coarser branches are placed inside, they will serve as the core base. Then they begin to apply smaller and thinner branches to it - always bending inward (then the broom does not fall apart so much), do not forget that the resulting structure must be dense. Having finished assembling the broom, we begin knitting the handle: we wrap the ends of the branches with rope (flax hemp works well), pulling it as tight as possible. After this, it is necessary to trim the edge of the handle so that no knots protrude from it. It is best to wrap a small cloth around the area where you are going to hold the broom. Do not use wire for tying - you can scratch your hands or burn your skin.

Drying and storing brooms

It is very important to dry the broom correctly; this determines how it will be stored, how much it will retain its beneficial properties and how long it will last in the bathhouse. Agree, it’s not very pleasant when a purchased broom, beautiful in appearance, loses half of its leaves even after soaking, but as soon as you hit it several times, it turns out that there’s nothing to steam with.

Drying must be done in a dry, well-ventilated area without direct sunlight. The ideal place is the attic of a bathhouse or barn. Brooms are dried in a suspended state; to do this, they are tied in pairs and thrown over a stretched rope or wire.

A very important rule is to use loosely laid brooms, then the drying process goes faster and molding of the leaves is avoided. After drying for a week, when the brooms begin to rustle, they are tied more tightly and placed in piles, pressing them against each other so that they take on the shape of a fan. Then the finished products are stored in a dry, ventilated room. Villagers can store brooms in the hay, while city dwellers can store them in paper bags.

BROOM WITH YOUR OWN HANDS – WHAT AND HOW TO USE STEP BY STEP..

On a note

If you are preparing brooms for the whole year, you need to store them either under a canopy or in a well-ventilated area. The brooms need to be tied in pairs and hung on a pole with the crown down.

“In a bathhouse, a broom is more valuable than money”

A GOOD BROOM IS NOT JUST AN ATTRIBUTE, IT IS THE MAIN ITEMS IN THE BATH. TIING HIM IS A WHOLE ART. THIS PROCESS SHOULD BE APPROACHED SERIOUSLY SO THAT AFTER VISITING THE STEAM ROOM YOU WILL BE PLEASURE AND NOT DISAPPOINTMENT.

Someone will say what is so difficult here? I cut the branches, tied them into a bundle - and the main bath attribute is ready, but this is not so. While such a broom is stored, its branches dry out. Before going to the bathhouse, the broom should be tied with twine, otherwise it will simply fall apart. If you dry the broom incorrectly, then at the first blows to the body the foliage will fall off.

A broom is knitted from branches of trees, bushes and even herbs. Birch, oak, cypress, juniper, and eucalyptus brooms are especially popular.

Often, in addition to tree branches, wormwood shoots are added; after steaming, it emits a bitter aroma and releases essential oils that penetrate the body through the respiratory tract and skin pores.

I will describe the process of knitting the main bath attribute using the example of the most common birch broom.

It's time to prepare brooms

You need to start collecting branches after Pegrov's fast (from June 24 to July 11). The harvesting season lasts no more than two weeks. By this time, the leaf on the trees is gaining full strength and subsequently holds on well. In August, juices practically stop flowing into the leaves; they gradually begin to wither. It is better to use such a broom immediately; it is not suitable for drying.

For my brooms, I take raw materials from 7-9 year old trees, cutting off their lower branches, and at the same time forming the crown of the tree.

I cut branches no shorter than 50 cm and not all in a row, but such that at the end there are not only leaves, but also small twigs (photo 7). The more such additional branches, the fluffier and softer the broom will be. Bundle

I tear off the lower branches on the branches and form a broom, stacking them on top of each other (photo 2). I make the butt with a diameter of at least 6-6.5 cm.

The formed broom must be tied properly. First, I determine the length of the butt - the most optimal is from 20 to 30 cm, but more is possible.

I grab the lower part of the broom with two turns of twine and tie a knot, not squeezing the branches too much, so that, having divided the broom into two approximately equal branches, it is possible to twist them with a figure of eight force with a couple of turns (photo 3). At this moment, the branches are so compressed by the rope that they do not give any slack when drying.

Then I twist both halves together in a braid. Near the foliage, I tie one half of it with twine to a knot near the very crown of the broom. Using two or three turns of the same twine around the entire butt, I forcefully squeeze the second bundle together with the first. After crimping, I tie the main knot (photo 4) I trim the bottom of the butt (photo 5) I lightly fluff the broom crown with my hands and shake it, giving it volume (photo 6)

Do-it-yourself bath broom - an interesting old-fashioned method

When are birch brooms harvested?

More advice from the older generation: cut a broom when the leaf on the birch tree is no larger than an old five-kopeck coin, and it should feel slightly sticky to the touch.

Birch brooms harvested in May smell differently than summer ones: they add a smell very similar to the smell of propolis. At this time, there are light stripes on the skin of the twigs, which release this aroma. Such stripes are not found on all branches; they need to be selected separately. When you run your hand along such a branch, you feel the tubercles - these are the same resinous, odorous secretions. If anyone hasn't tried it, try it. Very pleasant sensations, although the sheet is sticky at this time.

If you don’t need to cut more than two or three pieces of a young tree, you can harm the plant. Know your limits - take care of nature!

Separately growing young trees are an excellent choice

You can navigate by the stem of a young birch leaf. If it has already turned reddish, you can cut it, but if it is green, it’s too early.

The video shows how to choose birch branches and correctly knit brooms from them.

We prepare oak brooms

But there are lovers who harvest oak brooms in September. In this case, the leaf turns yellow or yellow. They say it also “works” very well.

The preparation of oak brooms has its own specifics:

firstly, the cut branches are stored in a shady place for an hour and a half, and only then can they be transported;
secondly, after the oak broom is tied, you need to put pressure on it to give it the shape of a fan - this shape is the most common, but some people prefer oak brooms of the traditional spherical shape.

When to cut linden brooms

Linden with flowers smells amazing, but they won’t be able to “work” properly - the leaf is soft

Preparation of coniferous brooms: spruce, juniper

The “widest collection range” is found in coniferous species. There are no restrictions here. In Siberia, coniferous brooms are made both in the most severe frosts and in the summer...

Choose a warm, fine, dry day for harvesting. The branches begin to be cut after the dew has dried. They choose the young and flexible. There are no other recommendations.

How to make nettle brooms

Young shoots without color, about 40-50 cm long, are cut off. They are made short and fluffy. It’s better to work with gloves: it stings. It turns out to be quite soft: only for one person.

Nettle broom. It sounds even scarier than spruce. But the benefits are endless

There are quite a few ways to steam a nettle broom. Basically, they dip into hot (not boiling water) water for 3-5 seconds, then into cold water. All.

The second option is to dip it in cold water, then after steaming, trample on it in the steam room with your feet, hold it over the steam, adding a ladle of water.

Regardless of how you prepare the broom, they need to “work” on the already steamed body. That is, you first need to steam with birch.

There is one thing about using a nettle broom: it strongly stains the wood. Therefore, it is better not to put it on the shelves. Bring a rug and place it on it.

All other brooms (read the article about what they are and how they affect the body) are collected in the same time frame as birch brooms until August 2.

If you want to knit a broom from herbs, you need to know the timing of its flowering - at this time they have the highest concentration of useful substances.

How to choose branches for a bath broom

Branches are cut from young trees that grow in sunny, non-wetlands, away from roads and enterprises with harmful emissions.

How to knit brooms for a bath correctly

The easiest way is to tie the broom tightly with natural twine at the butt and at the beginning of the foliage

There are several knitting techniques:

Proper drying

How to store bath brooms

If you have your own hayloft, you can stack the brooms on dry hay, placing them loosely next to each other. Cover the top with dry hay. This is how our ancestors kept them.

You can also store brooms in the refrigerator: they are packed in a plastic bag or wrapped in cling film, placed on the bottom shelf, in a dark, dry corner.

In the bath science, a Russian person cannot have trifles. Moreover, if we are talking about a bath broom made of birch branches, then it’s hard to call it a trifle. It is important to know when to prepare birch brooms for a bath in 2019 so that the brooms are of the best quality.
It’s hard to imagine a full trip to the bathhouse without a broom. It should not only be beautiful in appearance, but also strong. It is for this reason that birch branches need to be collected from the tree at their special time, when they have a lot of sap and strength. And also useful in the summer.

How to understand that the time has come
How to tie a broom correctly

How to understand that the time has come

So, many experienced bathhouse owners say that the best date to prepare birch brooms for a bathhouse in 2019 is the date after Peter’s Day. That is, you can collect branches for brooms sometime after July 10th.
But in the old days in Rus' it was believed that the best brooms were harvested from those birches that were in bloom. That is, there should be earrings on the birch tree. It was then that the branches were cut to collect them into strong brooms for the bath. That is, they made preparations somewhere in early June.

In the modern world, when harvesting bath birch brooms, you need to pay attention to the climate. So, it is difficult to identify a universal time when to prepare birch brooms for a bathhouse in 2019. But it is definitely believed in modern bath art that branches with earrings are not suitable for making brooms. Perhaps they were suitable for royal baths, but today everything has changed. So, it is best to harvest branches on a broom in mid-July: this will be the most optimal solution.

About the correct preparation of brooms

When you have chosen the date to prepare birch brooms for a bath in 2019, you need to collect the twigs. After this, you need to properly dry them and collect them into brooms, which are really...

What is important to know when harvesting birch branches for bath brooms:

It is best to collect those branches that are closer to the ground;
Harvesting should be carried out exclusively in warm and dry weather;
The branches that are closest to the ground are the youngest. These are exactly what are needed to prepare strong brooms;
If the foliage is wet, then when drying the product it will become dark and curl, which is very bad for the quality of the broom;
Wet branches collected in a broom can quickly fly off;
If you collect branches for a broom incorrectly, the birch bath broom will lose most of its beneficial properties;
It is also important to choose the right birch tree from which you will take branches. The ideal option is when branches are collected from a young tree. In general, it is ideal if the tree has not bloomed even once, and its leaves are delicate and silky.
The birch tree itself should be beautiful and smooth, there should be no growths on it: after all, trees, like people, are susceptible to various diseases. A sick tree's foliage and branches will also be weak and will not bring the maximum benefit that every person expects from going to a Russian bathhouse.

Advice!
There is no need to collect branches from birch trees that grow next to roads. They absorb dirt from cars. So, it’s best to go to the forest or clean grove for supplies. It is ideal if the birch tree grows near a stream or river.

To feel the tree and its strength, you need to pick one leaf. Next you will need the bottom part of the sheet: it should not be rough (otherwise the broom will be rough and hard when used). The appropriate leaf is velvety and smooth.

How to tie a broom correctly

In this case, words will be superfluous, and especially for you we found a step-by-step photograph. A correctly assembled broom is half the success, and the other half is to choose the right period when to harvest birch brooms for a bathhouse in 2019, as well as to choose the right tree to collect the material.